Setting Up Water Purification in Your New Indore Home – The Complete Guide
Moving into a new home or flat in Indore is exciting — but setting up safe drinking water from day one is essential. Indore's tap water, whether from the Narmada municipal supply or a borewell, has TDS levels of 300–700 mg/L that make an RO purifier not just advisable but necessary.
This guide walks you through choosing the right RO model, where to install it, what the process involves, and how to maintain it — specifically for Indore's conditions.
📋 Quick Checklist for New Home RO Setup
- ✅ Find out your area's water source (Narmada municipal or borewell)
- ✅ Get a free TDS test done before buying
- ✅ Choose the right RO model for your family size and water quality
- ✅ Decide on installation location (under-sink preferred in new kitchens)
- ✅ Book professional installation — run 2 tanks to waste before drinking
- ✅ Set up an AMC plan to keep the purifier maintained without tracking yourself
Step 1: Know Your Area's Water Quality
Before buying any purifier, it helps to know what you're dealing with:
| Area | Water Source | Typical TDS | Special Concerns |
|---|---|---|---|
| Vijay Nagar, Palasia, AB Road | Narmada municipal | 280–400 mg/L | Chlorine (seasonal) |
| Nipania, Bhawarkuan, Scheme 54 | Narmada municipal | 300–380 mg/L | Hardness |
| Old Indore, Rajwada area | Narmada + old pipes | 320–480 mg/L | Lead from old pipes |
| Rau, Mhow, Sanwer Road | Borewell / mixed | 480–700 mg/L | Fluoride, nitrates |
| Manglia, Lasudia, Piplyahana | Mixed supply | 350–500 mg/L | Seasonal quality drops |
Aqua Care RO provides free TDS testing at your new home. Call and we'll come test your tap water before you invest in any purifier.
Step 2: Choose the Right RO Model
| Family Size | Water Source | Recommended Model | Price Range |
|---|---|---|---|
| 1–2 people (1 BHK) | Narmada municipal | Basic RO 7-stage (8L tank) | ₹6,000–₹7,000 |
| 3–4 people (2 BHK) | Narmada municipal | Copper+Alkaline RO 8-stage (12L) | ₹7,500–₹9,000 |
| 4–6 people (3 BHK) | Narmada municipal | UV+Alkaline RO 8-stage (15L) | ₹9,000–₹11,000 |
| Any family | Borewell (Rau, Mhow) | RO+UV 8-stage (15–20L tank) | ₹9,000–₹12,000 |
| Office / small shop | Any | Commercial RO 25 LPH | ₹16,000–₹22,000 |
💡 Best Choice for New 2–3 BHK in Indore (2025)
The Copper+Alkaline RO (₹7,500–₹9,500) is the most popular choice for new homes in Indore. It handles Narmada supply's TDS effectively, adds beneficial minerals back (correcting over-purification), and the copper stage provides antimicrobial properties. Annual maintenance is simple and low-cost.
Step 3: Pick the Installation Location
In a new home, you have the advantage of planning the installation from scratch. The options:
- Under-sink (recommended for new kitchens): The purifier sits inside the kitchen cabinet below the sink. The dedicated tap is installed at the sink. Clean look, hidden unit, easy drain connection. Best for modern flat kitchens.
- Wall-mount (above counter): The purifier is mounted on the kitchen wall beside or above the counter. The tank is visible but easy to monitor. Better for older kitchens or when under-sink space is limited.
- Counter-top: The purifier sits on the counter. Convenient but takes up workspace. Uncommon in new Indore homes.
⚠️ Avoid These Installation Locations
Do not install an RO purifier directly above the stove or near a gas line — heat degrades plastic components and membranes. Avoid direct sunlight (speeds up algae growth in the tank). Also avoid a location where the drain hose can't run downhill to a sink or drain point — RO requires gravity-assisted drainage.
Step 4: The Installation Process
Professional installation by Aqua Care RO (₹500) includes:
- Wall or cabinet mounting of the purifier body
- Tap drilling in sink or countertop (if required)
- Inlet pipe connection to kitchen water supply line with a shut-off valve
- Drain tube routing to kitchen sink drain
- System pressure test — check for leaks at all fittings
- First tank fill and flush (run to waste)
- TDS calibration — output set to 100–150 mg/L
- Output water quality test before handing over
Time required: 45–90 minutes for standard installation. Under-sink with tap drilling: 60–90 minutes.
Step 5: First-Use Instructions
- Do not drink the first 2 tank fills — manufacturing residues need flushing out
- Run the first 2 tanks to waste (let the tank fill and open the tap to drain)
- After the 3rd fill, taste the water — it should taste clean and slightly mineral
- Check for any drips or leaks at all connection points in the first 48 hours
- Note the installation date on the purifier for future filter change tracking
Annual Maintenance Budget for a New Home RO
| Item | Frequency | Approx. Cost |
|---|---|---|
| Annual service visit | Once a year | ₹249–₹500 |
| Sediment + pre-carbon filter | Every 4–6 months | ₹250–₹400 |
| Post-carbon filter | Every 6–8 months | ₹150–₹200 |
| RO membrane (year 2) | 18–24 months | ₹1,200–₹2,200 |
| Total year 1 | ₹650–₹1,100 | |
| Total year 2 (with membrane) | ₹1,850–₹3,300 |
An AMC plan (₹999–₹2,500/year) covers most of this with scheduled visits, priority service, and filter discounts — saving you the hassle of tracking it yourself in a new home.